Six files had outdated status notes that the F-09 first run on
2026-05-30 made wrong:
- ops/restore-tests/komodo-bootstrap-runbook.md: "Erster echter Lauf
steht noch aus" -> first run confirmed
- ops/restore-tests/komodo-bootstrap-plan.md: "Noch offen vor dem
ersten echten Lauf" section -> "Bestaetigte Laeufe" table with
the --what-if and --keep-data runs
- ops/restore-tests/immich-runbook.md: status note still said
"Erster echter Lauf steht noch aus" although the Immich first run
was 2026-05-27; correcting in the same sweep
- docs/AUDIT_2026-05-25_TODO.md: Sprint 2 entry on Komodo bootstrap
path no longer carries the "Trockenlauf-Skript bleibt als offene
Folgeaufgabe" tail
- docs/SERVICES_RECOVERY.md: replaced the "Trockenlauf-Idee (Doku-only,
nicht ausgefuehrt)" section with the confirmed repo-script flow and
marked the two "Naechste Aufgaben" rows about the dry-run as done
- docs/RESTORE_DRILL_ROUTINE.md: Q2 2026 DR-Sanity-Check entry now
splits Komodo-Bootstrap-Pfad (done) from the two still-open items
(Gitea bundles, secrets inventory)
No behavior change, only documentation consistency.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Result on host: SUCCESS, all 5 smoke checks green.
- docker compose config valid
- Test-Mongo healthy in ~6s
- Mongo authenticated ping ok (Test-Creds)
- Komodo Core HTTP 200 on 127.0.0.1:19120
- Test-Periphery container state running
Production komodo-{mongo,core,periphery} and /mnt/user/appdata/komodo/
were not touched; test ran in isolated project restoretest-komodo with
disposable datadir under /mnt/user/backups/restore-lab/komodo/.
Report at /mnt/user/backups/restore-reports/komodo-bootstrap-2026-05-30.md.
Operator-click pattern preserved: SSH to root@kallilabcore is an action
class that requires explicit instruction per CLAUDE.md; the auto-mode
classifier correctly blocked a non-destructive SSH probe. Operator ran
the command via the Unraid web terminal.
ops/komodo/docker-compose.yml is now demonstrably viable as the recovery
anchor for the bootstrap stages in docs/SERVICES_RECOVERY.md, not just
assumed viable. Image digests (mongo:7.0.32, komodo-core:2,
komodo-periphery:2) and Mongo auth schema verified.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
New services/authelia-diff.sh compares the access_control: section of the
repo baseline against the live host configuration.yml. OIDC clients,
identity providers, and secret values stay out of scope by design.
Exit codes: 0 ok, 1 drift, 2 file missing, 3 section missing, 4 tool missing.
posture-check.sh gains check_authelia_config_drift, which calls the diff
script and reports drift as warning (not critical). SKIP_AUTHELIA_DRIFT=1
opts out; AUTHELIA_DIFF_SCRIPT overrides the path.
WORKFLOW.md gets a dedicated "Ausnahme: Authelia configuration.yml" section
analogous to the Traefik dynamic-config exception, with the mandatory
repo->host merge workflow and the env-variable contract.
Smoke-tested locally: identical files rc=0, ACL change rc=1 with proper
unified diff, non-ACL change (session.default_redirection_url) correctly
ignored.
Operator follow-up: set up a read-only repo mirror at
/mnt/user/services/homelab-infra/ so the check finds a current baseline.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Setup-Pfad final geworden, vier Reparaturen unterwegs:
1. EAI_AGAIN: Container kann git.kaleschke.info nicht aufloesen ->
--add-host (analog zur Komodo-extra_hosts)
2. Token-Sichtbarkeit in ps/inspect -> --env-file mit 0600 tempfile
3. EACCES auf State-Mount: Renovate-Image laeuft als uid 12021 ->
chmod 0777 auf /mnt/user/services/renovate/state
4. "Repository does not permit pull or push": Renovate-Source-
Code (lib/modules/platform/gitea/index.ts) prueft hardcoded
repo.permissions.push aus der Gitea-API. Mein initialer
SQL-INSERT in die collaboration-Tabelle hatte den Gitea-
In-Memory-Permission-Cache nicht aktualisiert; Operator-
UI-Klick "Entfernen + neu hinzufuegen" loeste den Cache-
Refresh.
Konfigurations-Trennung:
- renovate.json (Repo): nur Repo-Settings (extends, packageRules,
ignorePaths, manager file patterns, labels)
- ops/renovate/bot-config.js: Bot-Settings (platform, endpoint,
autodiscover=false, repositories=[Micha/homelab-infra],
Concurrent-Limits)
Bot-Felder in renovate.json fuehren zu "Repository is forbidden,
status: disabled" weil Renovate die Repo-Config nicht als Bot-
Config wertet.
Erstlauf am 2026-05-29: 5 PRs, 1 Dependency-Dashboard, 8 Branches.
Komodo-Major bleibt durch packageRule deaktiviert wie erwartet.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
renovate.json: gitea platform, autodiscover Micha/*, group rules
(major separate, minor+patch+digest grouped, stateful tier-1
individual, komodo-major disabled), pin range strategy, no
automerge, dependency dashboard enabled.
ops/renovate/run-renovate.sh: one-shot docker run wrapper that
reads the Gitea PAT from /mnt/user/appdata/secrets/renovate_token.txt,
runs renovate/renovate:41, logs into /mnt/user/services/renovate/logs/.
docs/RENOVATE.md: 5-step operator setup (Gitea service account,
PAT, token file, first run, six-hourly user script). Explicit
no-automerge stance with notfall-stop checklist.
Cross-doc sweep: SECRETS_MAP entry for renovate_token.txt,
REPO_MAP entry for RENOVATE.md, AUDIT_2026-05-25_TODO new
Sprint 8 with F-15, F-07, F-09 rest, F-12 status, MIGRATION_LOG
captures the four-block sprint in one entry.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Windows Scheduled Task "KalliLab H Drive Nearline Pull" auf dem
Operator-Windows-PC registriert: taeglich 05:30 nach dem Borg-
Dump-Fenster. RunLevel Limited, StartWhenAvailable, Akku-OK,
Execution-Time-Limit 2h. Naechster Lauf 2026-05-29 05:30.
Repo-Snippet in H_DRIVE_NEARLINE_PULL.md korrigiert: PowerShell-
Enum-Wert ist Limited, nicht LeastPrivilege (alter Snippet haette
beim ersten Register-ScheduledTask einen Parameter-Binding-Fehler
geworfen). Status auf "produktiv" gesetzt.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Operator-Entscheidungen 2026-05-28:
- F-03 zweites Off-site: bewusst NICHT umgesetzt. 3-2-1 ist mit
Live + lokalem Borg + Hetzner + H:/-Nearline erfuellt; ein
zweites Off-site deckt nur den Fall "Hetzner-Account verloren"
ab, Aufwand unverhaeltnismaessig fuer Familien-Homelab.
Stattdessen drei Folge-TODOs zur Haertung der bestehenden
Topologie. Hetzner-2FA bewusst ohne (Operator-Praeferenz,
analog USV-Risiko-Akzeptanz), durch starkes Passwort +
Backup-Zahlungsweg + Login-Mails ersetzt. Borg-Append-Only-
Befund: Repo laeuft im Mode 'full', custom_flags leer; Setup
waere server-seitig in Hetzner-authorized_keys (Folge-Sprint).
Review-Trigger in OFFSITE_BACKUP_OPTIONS.md dokumentiert.
- paperless-gpt: behalten bis Paperless-NGX 3.0 (erwartete
native KI-Features). Aktuell 0 Traefik-Zugriffe in 7 Tagen,
Resource-Footprint 34 MB RAM.
- BentoPDF: behalten als situatives Tool. 0 Traefik-Zugriffe,
4 MB RAM. Begruendungs-Anker im SERVICE_CATALOG.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Operator-Befund beim F-17-Versuch: Plex-Server war seit 18.05.
unclaimed (Preferences.xml ohne PlexOnline*) und Library-Sections
leer. Filmdateien unter /mnt/user/media/* blieben unangetastet.
Reclaim als Xeridos via inline PLEX_CLAIM-Env beim docker compose
force-recreate. Token nirgendwo persistiert (kein .env, kein Repo,
keine Komodo-Stack-ENV); zweiter Recreate ohne Token, damit
docker inspect-Snapshot sauber bleibt.
Endstand: PlexOnlineUsername Xeridos, PlexOnlineHome 1,
PublishServerOnPlexOnlineKey 0 (Remote Access aus). Bibliotheken
operator-seitig wieder eingerichtet (/data/movies 1.4 TB,
/data/Heimatfilme 300 GB). Plex bleibt LAN/Tailscale-only,
konsistent zur FRITZBox-Bereinigung vom selben Tag.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- AUDIT_2026-05-25_TODO: Borg-Stale, Cert-Expiry, Container-Down
Alerts auf "erledigt" (Cron */5 textfile exporter live,
Prometheus reload mit 14 Regeln); Gitea-Bundle-Cron auf "erledigt"
(User-Script gitea-bundle-mirror-6h aktiv, Bundles 644);
H:/ Nearline-Pull auf "erledigt (Pull live, Scheduled Task offen)"
mit Zaehlerstaenden 19 Borg-Dumps + 10 Bundle-Files.
- MIGRATION_LOG: neuer Eintrag fasst die drei zusammenhaengenden
Live-Aktivierungen zusammen, inkl. Befund-Ursprung (Permission-
Drift), Reparaturen und expliziter Ausklammerung der nicht
angefassten Themen (Auth, Hermes, USV, FRITZ!Box, Plex).
- H_DRIVE_NEARLINE_PULL: Erstlauf-Befund mit Permission-Issues
und nachgezogenem Stand; Erwartungs-Liste auf real geliefertes
Set angepasst; Flash-Config explizit Out-of-Scope.
- pull-critical-backups.ps1: Live-Robocopy-Output an Out-Null,
damit der Markdown-Report nicht von Robocopy-Strings zerlegt
wird (PowerShell-Pipeline-Quirk im foreach).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Pull repo map up to include FAMILY_VIEW_DASHBOARD,
RESTORE_DRILL_ROUTINE, IMMICH_RESTORE_TEST, FRITZBOX_PORT_
CORRECTION_PLAN and OFFSITE_BACKUP_OPTIONS.
Mark Sprint 2 'Komodo bootstrap', Sprint 3 'Family-View',
Sprint 4 'Family onboarding' and Sprint 7 'Quarterly restore drill'
as done with explicit completion notes. Carry the FRITZBox UPnP
finding forward; tag the second offsite item as decision-pending.
Add two doc-only migration log entries for the bootstrap/family/
onboarding/drill sprint and for the FRITZBox/offsite preparation.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Micha